Publicité
Les langues disponibles
Les langues disponibles
2.3. MODES
DMX Mode: Master: send synchronous DMX signal to slave machine
Slave: receive synchronous DMX signal from master machine or be controlled by DMX controller
Preset Mode: all red, all green, all blue, all cyan, all magenta, all yellow, all white
Auto Mode: CHASE,FADE,SOUND,DIMMING can be combined as per your requirement
20 built-in program
Manual Mode: all spot red: 0-255;
all spot green:0-255;
all spot blue:0-255;
2.4. OPERATION
MODE, SET, UP, DOWN four buttons for operation
• Press MODE to mode
• Press SET to enter submenu
• Press UP and DOWN to adjust the value
Menu
2.4.1. Setting
• Press MODE to "L. 001" or "S. ON", "L" denotes "Dimming", "S" denotes "Display sleep"
• Press "SET" to select "L.000" or "S.ON"
• Press "UP" or "DOWN" to adjust the value, Dimming with the range of '0-255", select "ON" or "OFF" to turn on or turn off
Display sleep function
Notice : When the function of Display sleep is on, the screen will display nothing but a little point to show DMX signal after
some sec non-operation.
2.4.2. DMX Mode
Selection:
• Press "MODE" to " d-P1" or "d-P2" or "d-P3" or "d-P4"
-
"d-P1" : Mode1 3CH RGB;
-
"d-P2": Mode2 6CH RGB; 6 channel mode is that output 1 and 2 will be controlled synchronously and also 3 and 4.
-
"d-P3": Mode3 12CH RGB;
-
"d-P4": Master Mode;
• Press "UP" or "DOWN" to select these modes
Publicité
