Bosch GSR Professional 9,6-2 Notice Originale page 8

Masquer les pouces Voir aussi pour GSR Professional 9,6-2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
8 | English
Hold the power tool only by the insulated
gripping surfaces, when performing an oper-
ation where the cutting tool may run into
hidden wiring. Contact with a "live" wire will
make exposed metal parts of the tool "live"
and shock the operator.
Hold the power tool with a firm grip. High re-
action torque can briefly occur while driving in
and loosening screws.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
Do not open the battery. Danger of short-cir-
cuiting.
Protect the battery against heat, e.g.,
also against continuous sun irradiation
and fire. There is danger of explosion.
1 609 929 M81 | (3.12.07)
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The tool is intended for driving in and loosening
screws as well as for drilling in wood, metal, ce-
ramic and plastic.
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Torque preselection ring
5 Gear selection lever
6 Battery*
7 Battery release button
8 Screwdriver bit*
9 Rotational direction switch
10 On/Off switch
11 Universal bit holder*
12 Securing screw for keyless chuck
13 Hex key**
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the delivery
scope)
Bosch Power Tools

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gsr professional 12-2Gsr professional 14,4-2

Table des Matières