RCA RCRV06GR Manuel De L'utilisateur page 19

5.
Once you've finished the first stage of the activity, press
LISTEN. The remote responds: "End of string. Button
accepted. Push another button."
6.
Press the buttons, one by one, for the second stage of the
activity—in our example, we press the buttons to tune to the
second channel:
First, we press 0. The remote responds: "Button accepted.
Push another button."
Then we press 4. The remote responds: "Button accepted.
Push another button."
7.
Once you've finished the second stage of the activity, press
LISTEN. The remote responds: "End of string. Button
accepted. Push another button."
8.
Press the buttons, one by one, for the third stage of the
activity—in our example, we press the buttons to tune to the
third channel:
First, we press 0. The remote responds: "Button accepted.
Push another button."
Then we press 7. The remote responds: "Button accepted.
Push another button."
9.
Once you've finished the third stage of the activity, press
LISTEN. The remote responds: "End of string. Button
accepted. Push another button."
10.
Once you've finished the third stage of the activity, press
TRAIN. The RCA Voice Control Remote responds: "Voice
command assigned."
To use your multi-stage voice command activity:
Note: If the remote's KEYWORD light is off, press the LISTEN
button first.
1.
Say your keyword The COMMAND light illuminates.
2.
Say the voice command for this activity. In our example, it's
"Favorite." The remote automatically sends the commands for
the first stage of this activity. In our example, it tunes to our
first favorite channel (2).
3.
Say your keyword. Then repeat the voice command for this
activity. The remote automatically sends the commands for
the second stage of this activity. In our example, it tunes to our
second favorite channel (4).
4.
Say your keyword. Then repeat the voice command for this
activity. The remote automatically sends the commands for the
third stage of this activity. In our example, it tunes to our third
favorite channel (7).
Resetting the Remote
The RCA Voice Control provides two levels of reset. One level
clears voice commands but leaves everything else, such as device
setup info and user preferences, intact. The second level resets the
remote to its factory settings—like when you first unpacked it.
To reset only the voice commands:
1.
Press HELP.
2.
Press 3, then 0.
3.
The remote warns you that you will lose your voice
commands. Press PROG to continue. After a brief pause, the
remote responds: "Voice commands erased."
19