Philips FC9306 Mode D'emploi page 11

adjusting suction power
1 During vacuum cleaning, you can adjust the suction power with the
selection wheel on top of the appliance.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use moderate suction power to vacuum carpets.
- Use minimum suction power to vacuum curtains, tablecloths etc.
pausing during use
1 If you want to stop vacuum cleaning for a moment, press the on/off
button on top of the appliance to switch off the appliance
2 Insert the ridge on the nozzle into the parking slot to park the tube
in a convenient position.
3 To ensure stable parking of the telescopic tube, adjust the tube to
the shortest length.
4 To continue vacuum cleaning, simply press the on/off button on top
of the appliance to switch on the appliance.
storage
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 Press the cord rewind button to rewind the mains cord.
3 Put the appliance in upright position. To attach the nozzle to the
appliance, insert the ridge on the nozzle into the storage slot.
- To ensure stable parking of the telescopic tube, adjust the tube to the
shortest length.
Tip: We advise you to wrap the hose around the tube to ensure stable parking
and to save even more space when you store the appliance.
replacing/emptying the dustbag
Tip: We advise you to clean the motor protection filter every time you replace
or empty the dustbag (see chapter 'Cleaning and maintenance of filters').
Always unplug the appliance before you replace the disposable dustbag
or empty the reusable dustbag.
English
11