Timer Function; Problem Solving - Selegiochi STAR THEATRE Mode D'emploi

The stars can turn clockwise and anticlockwise. The rotation speed is fi xed.
1. Press the Rotation
function switch to ON.
1. Press the button on the front of the projector to activate the timer.
2. Press the button once to set the timer for 15 minutes, twice to set it for 30 minutes and three
times to set it for about 60 minutes. At the end of the period of time selected, the projector will
turn itself off automatically. Press the button again to deactivate the timer function.
3. If the timer is not set, the projector will turn itself off automatically after about three hours.
At the end of the selected time period, or after three hours if the timer is not set, the projector will
turn itself off automatically. The projector must be turned on again to restart the projection.
Q
The stars are not clearly visible.
- Ensure the centre of the projection image is in focus.
A
- Wait a while for your eyes to become used to the dark.
- Make sure there is no light in the room, or on the ceiling, walls or the place where the images are projected.
- Ensure there are no objects blocking the projection.
- Make sure the projection distance is not too great.
Q
The Milky Way is not projected completely and is out of focus
A
- The visible sections of the Milky Way vary according to how the disc is inserted. If you can only see the outer edge of the
Milky Way and you want to observe the centre, activate the Rotation function and wait for the section you want to
observe to come into view. Then deactivate the Rotation function to block the rotation of the images.
Q
The projector turns itself off unexpectedly.
- If the main switch is ON and there is no disc in the box, the projector will turn itself off automatically to prevent eye injuries.
A
Insert the disc and restart the projector.
- Ensure the timer is not set: after the selected period of time, the projector will turn itself off automatically and must be turned on again.
- If the timer is not activated, the projector will turn itself off automatically after about three hours and must be turned on again.
Q
The projector is not working.
- Make sure the adaptor is connected correctly.
A
- Ensure the disc is inserted.
Q
The shooting stars do not appear.
23
- Make sure the Shooting Stars function switch is ON.
A
- Activate the Rotation function.
Q
The stars do not rotate.
- Activate the Rotation function.
A
- Make sure the disc and / or the disc box are in the correct position.
USING THE ROTATION FUNCTION
Hemisferio
Septentrional
Hemisferio
Meridional
2. Press the button once for the images to turn anticlockwi-
se (showing the movement of the heavens in the Northern
hemisphere) and press a second time for them to turn
clockwise (showing the movement of the heavens in the
Southern hemisphere). When the anticlockwise movement
is selected, the N pilot light will come on, and if the clockwi-
se movement is selected, the S pilot light will come on.

TIMER FUNCTION

PROBLEM SOLVING

ENGLISH
3. Press the button
once to deactivate
the Rotation function
and the stars will stop.
When the function is
deactivated, both pilot
lights will turn off .
23