Stahl 8571/51 Instructions De Service page 21

7.2 Fitting
If deployed outdoors / where exposure to the elements is the case, it is recommended to
fit the enclosure with a protective roof or wall.
Application position: hinged cover downward, terminal chamber upward.
• Vertically mount maintenance socket isolator Type 8571/51 with four screws to the
application position on an evenly surfaced wall. (for mounting dimensions, see the
dimension sketch or the reverse side of device)
• The mounting holes are oblongly-shaped slots. These holes facilitate correct vertical
and horizontal mounting.
7.2.1 Auxiliary contacts" installation set
Installation
• Auxiliary contacts can either
be snapped into the left or
right socket.
• If desired, both sockets can
be equipped with contacts.
Figure 7-2:
Installation of auxiliary contacts
Maintenance socket isolator 8571/51
Arrangement and fitting
19