Velleman DVM68 Notice D'emploi page 3

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal
lifecycle could harm the environment. Do not dispose of the unit
unsorted municipal waste; it should be taken to a specialized com
device should be returned to your distributor or to a local recyclin
local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly befo
into service. If the device was damaged in transit, don't install or use it and
Your DVM68 is a autoranging professional digital multimeter with a 3 ¾ di
ideally suited for field, lab, shop, and home applications. By using the lates
technology to significantly reduce the number of discrete internal compone
gives you superb measuring capability as well as the highest possible reliab
It is capable of performing functions :
DC Voltage
AC Current
Frequency
Also diodes and transistors (amplification hFE) can be tested.
Use extreme caution in the use of this device. Improper use of this device
death. Follow all safeguards suggested in this owner's manual in addition t
precautions in dealing with electrical circuits. Do not use this device if you
electrical circuits and testing procedures.
Not for commercial or industrial use.
Refer to the Velleman
2. Used symbols
This symbol indicates: Read instructions
Not reading the instructions and manual can lead to damage, inju
This symbol indicates: Danger
A hazardous condition or action that may result in injury or death
This symbol indicates: Risk of danger/damage
Risk of a hazardous condition or action that may result in damage
This symbol indicates: Attention; important information
Ignoring this information can lead to hazardous situations.
AC (Alternating Current)
DC (Direct Current)
Both AC and DC
Double insulation (class IIBprotection)
Earth
Fuse
Capacitor
Diode
Continuity
25.02.2011
User manual
AC Voltage
DC Current
Continuity
®
Service and Quality Warranty on the last pages
DVM68
3
al of the device after its
it (or batteries) as
ompany for recycling. This
cling service. Respect the
fore bringing this device
and contact your dealer.
digit LCD display. It is
test in IC and display
nents, the multimeter
liability.
Resistanc nce
Capacity
ce can result in injury or
n to normal safety
ou are unfamiliar with
ges of this manual.
njury or death.
ath
age, injury or death
©Velleman nv
Rev. 01