HQ Power VDSCDM1 Notice D'emploi page 6

input fader CH1
10
controls the source level for CH1
gain control CH1
11
adjust the volume of CH1
input toggle switch
12 Selects which source will be linked to which channel based on the connections on the rear panel
inputs. In CD1/CD2 position the internal CD players are active.
LED indicator
13
indicates the master output level
MIC control
14
adjust the microphone level
headphone channel selector
15
set the headphone input channel to CH1 or CH2.
cue level control
16
adjusts the cue volume
AUX in
17
auxiliary input socket
gain control CH2
18
adjust the volume of CH2
input fader CH2
19
controls the source level for CH2
skip backward button ( )
20
Use this button to skip backward to the previous track.
folder /+10 button
21 Browse through folders on MP3 discs with folders.
On a CD disc, this button advances 10 tracks.
skip forward button ( )
22
Use this button to skip forward to the next track.
pitch bend '-' (down) button
23
Press and hold this button to instantly decrease the pitch. Release to return to original setting.
pitch bend '+' (up) button
24
Press and hold this button to instantly increase the pitch. Release to return to original setting.
pitch button
25
Push this button to enable the pitch fader potentiometer [40].
search button
Press this button to switch the function of jog dial between search and pitch bend. When the
26
button is lit, turn the jog for quick search forward and backwards. When the button LED is off, the
jog wheel is used for pitch bend.
cue button
27
During play-back, press this button to return to the point when music started playing.
play/pause button
28
Use the play/pause button to switch between play-back mode and pause mode.
high range control for CH1
29
adjust the high volume for CH1
low range control for CH1
30
adjust the low volume for CH1
mid range control for CH1
31
adjust the mid volume for CH1
fader start
32 Activate cross fader [33] and start CD play-back using the cross fade function. Use the cross
fader for clean, fast and seamless transitions from one selected channel to another.
cross fader
Moving from left to right will start the right CD player and the left CD player will go in pause.
33
"Full left" selects channel 1 (left CD player active, right CD player in pause), and "full right"
selects channel 2 (right CD player active, left CD player in pause). With the cross fader at centre
29/01/2009
VDSCDM1
6
© 2008 Velleman Components nv