HQ Power VDSCDM1 Notice D'emploi page 5

4. Features
• ideal combination for professional DJ using the combination of CD player and mixer
• with anti-shock buffer and full MP3 functionality
• mixer with 2 line input to connect more devices, gain and 3-band equalizer for each channel, and
cross-fader (user-replaceable)
• with microphone and headphone inputs with separate volume control
• double CD player with anti-shock buffer, pitch control play/cue buttons and loop functions
• Joggle wheel for search possibilities
• folder button for easy MP3 control
• BPM control
5. Overview and operation
Refer to the illustrations on pages 2 and 3 of this manual. Note that the device has a dual lay-out,
left and right parts are similar. All buttons and indications on the top panel are present twice.
SGL/CTN button
Switch between single and continuous play mode. The selected mode is indicated on the LCD.
Single mode: Press SGL to select single mode (flashing 'single'). A selected track will play and at
the end of the track play-back will stop.
Continuous mode: Press SGL to select continuous mode (flashing 'continuous'). Continuous play
will play a selected track and at the end of it continues with the next track until the end of the CD.
When both draws contain a CD, following relay functions are available:
Relay 1: set both CD 1 & CD 2 in single mode (fixed 'single')
play-back: CD 1/track 1 – CD 2/track 1 – CD 1/track 2 ...
1 Relay 2: set both CD 1 & CD 2 to continuous (fixed 'continuous')
play-back: CD 1/all tracks in a row followed by CD 2/all tracks in a row
Relay 3: select single mode for CD 1 (fixed 'single') and continuous mode for CD 2 (fixed
'continuous')
play-back: CD 1/track 1 – CD 2/all tracks in a row – CD 1/track 2 - CD 2/all tracks in a row –
CD 1/track 3 - ...
Relay 4: select continuous mode for CD 1 (fixed 'continuous') and single mode for CD 2 (fixed
'single')
play-back: CD 1/all tracks in a row – CD 2/track 1 – CD 1/all tracks in a row – CD 2/track 2 –
CD 1/all tracks in a row - ...
track fast select button
2
Press 0-9 buttons to jump to the respective track in the CD.
open/close button
3
Press this button to load or eject a disk. Each press will open or close the disk tray.
BPM (Beats Per Minute) button
4
Press the BPM button repeatedly to set the BPM. Press and hold for 3 seconds to cancel.
PROG button
In stop mode, you can program several tracks (20max.)
• Press the stop button (play/pause [28]) to enter stop mode.
• Press the PROG button to enter program mode.
5
• Use the skip track buttons [20, 21, 22] to choose the track you want to hear, and then press
the PROG button to save your choice.
• Repeat this operation to select all tracks you want to program.
• Press the play/pause button [28] to start the playback.
time mode button
6
Selects between elapsed time, track remaining time or total remaining time display.
set start loop button (IN)
7
Press to select a starting point for a loop.
set end loop button (OUT)
8 Press to select an ending point for a loop. The selected part will now play repeatedly. Press again
to exit the loop.
re-loop button
9
Press to jump back to the start point of the loop.
29/01/2009
VDSCDM1
Top panel
5
© 2008 Velleman Components nv