Operation - BASETech 1541451 Notice D'emploi

10. Operation

• Remove the lid of the pitcher.
• Place one of the two attachments on the drive shaft.
• Place the drive shaft centred on the bottom of the pitcher.
• Pour fresh milk in the pitcher. Make sure you do not exceed the MAX level marked inside the pitcher.
- Lower MAX marking: Frothing
- Upper MAX marking: Heating
• Put the lid on the pitcher. Make sure that the rubber sealing ring is installed correctly.
• Put the pitcher on the base.
• Connect the mains plug to a standard mains socket.
• Press the on/off switch.
- Press once: Froth warm milk (indicator lights up red)
- Press twice: Heat milk (indicator flashes red)
- Press three times: Froth cold milk (indicator lights up in blue)
- Press four times: Turn off the device
• The product turns off automatically after approx. 90 - 120 seconds. The indicator goes out.
• Let the product rest for at least 3 minutes before continued operation.
The heating element is in operation while the indicator is red or flashing red.
The operating time depends on the amount of milk.
Use cold milk from the fridge to achieve the best results.
Frothing Heating
19