Display - Hotpoint Ariston FMG 1023 Mode D'emploi

Display

A
The display is useful when programming the machine and provides a great deal of information.
The duration of the available wash cycles and the remaining time of a running cycle appear in section A (the display will show
the maximum duration of the cycle chosen, which may decrease after several minutes, since the effective duration of the
programme varies depending on the wash load and the settings chosen); if the DELAYED START option has been set, the
countdown to the start of the selected wash cycle will appear.
Pressing the corresponding button allows you to view the maximum spin speed and temperature values attained by the
machine during the set wash cycle, or the values selected most recently, if these are compatible with the set wash cycle.
The "wash cycle phases" corresponding to the selected wash cycle and the "wash cycle phase" of the running wash cycle
appear in section B:
Main wash
Rinse
Spin
Pump out
The icons corresponding to "temperature", "spin" and "delayed start" (working from the left) are displayed in section C.
The "temperature" bars
The "spin" bars indicate the maximum spin level which may be selected for the set cycle.
The "delay" symbol , when lit, indicates that the set "delayed start" value has appeared on the display.
DOOR LOCKED indicator light:
The lit symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns off before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE button; if the DOOR LOCKED
off the door may be opened.
indicate the maximum temperature level which may be selected for the set cycle.
B
C
GB
symbol is switched
7