Dörr PS-16050 Notice D'utilisation page 6

Operation
Inserting/replacing the batteries
Screw-off the cap at the bottom of the torch (1)
counter clockwise. Insert appropriate batteries
according to the polarity and screw on the cap again.
Turn on/off the torch
To turn on/off the light press the rubber button on the
bottom of the torch. The On/Off button is made of
fluorescent rubber and it glows at night
(if previously charged by light).
Light adjustments/dimmer
To dim the brightness and to switch on the strobe
light or the SOS flashing, turn the mode ring (2) to the
appropriate position (also note chapter
„Technical Specifications").
Specifications
Dimmer Positions
Function
Brightness
Runtime
(with fresh batteries)
Illuminant
Beam distance
Impact resistance
Weather resistance
Batteries
Measurements
Weight
Supplied with
Item No
6
• • • • • •
Light 100% Light 50%
500 Lumen 250 Lumen
3h 6h
1 CREE® XM-L (T6) LED, Risk Group 2
200m
up to 1,5m drop height
IPX8 (up to 2m water depth)
2pcs Lithium battery CR-123A (included),
(alternative power source: Lithium battery 18650 optional)
160 x Ø27mm, / Torch head Ø50mm
approx. 220g (w/o batteries)
Case, hand strap, black spare rubber button,
spare rubber sealing ring (O-ring), 2pcs CR-123A batteries
980540
•
Light 25% Strobe Light
125 Lumen –
12h 12h
SOS
SOS
Flashing
–
12h