Axis Communications T86 Série Mode D'emploi page 13

1
Network connector SFP (external) (2x)
2
Network connector RJ45 (external) (2x)
3
I/O connector (external)
4
Ground screw
5
Ground wire
6
Power cable (DC input)
7
Power connector (DC input)
19. If connecting several media converter switches in a daisy chain, you need to set the
dip switch of each outgoing network connector port that connects to another media
converter switch to position C.
Leave the dip switch in its default position (position B) when connecting the port directly
to the network. For more information, see Media converter switch connectors on page 16.
Important
If the system is not defined, use the default dip switch setting (position B).
AXIS T86 Media Converter Switch Series
13
EN