Viesta I2Z Manuel D'utilisation page 13

KEN001AKI
Using your induction hob
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
When you have finished cooking
1. Touching the heating zone selection control that you
wish to switch off
2. Turn the cooking zone off by scrolling down to"0". Make sure the display
shows "0", then shows "H".
3. Turn the whole cooktop off by
touching the "ON/OFF" control.
[English]
alternately with the heat setting
4. Beware of hot surfaces
"H" will show which cooking zone is hot
to touch. It will disappear when the
surface has cooled down to a safe
temperature. It can also be used as an
energy saving function if you want to
heat further pans, use the hotplate that
is still hot.
[ 13 ]
18.09.2017 • v09