Using Your Induction Hob - Viesta I2Z Manuel D'utilisation

KEN001AKI

Using your induction hob

To start cooking
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays
show " – " or " – – ", indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control, 3. Touching the heating zone selection control,
and the indicator next to the key will flash. and the indicator next to the key will flash.
4. Select a heat setting by touching the
• If you don't choose a heat setting within 1 minute,
the Induction hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
[English]
or control.
[ 12 ]
18.09.2017 • v09