Connecting Trafo Out - Harman AKG AMM 10 Mode D'emploi

Installation and Connection
ATTENTION

Connecting TRAFO OUT

46
3) Fit the TRAFO IN module carefully.
Figure 18: Mounting the transformer
RISK OF DAMAGE!
When fitting the module, take care to ensure that none of the pins of the connector becomes
bent.
4) Screw the transformer module in place with the screw supplied.
5) Attach the cover plate together with the strain relief clip.
Figure 19: Screwing on the base plate.
The TRAFO OUT plug-in module can only be used in conjunction with the AUX/LINE OUT
module or the LINE OUT (ACTIVE) module or the LINE OUT (PASSIVE) module.
You will need:
• TRAFO OUT module and AUX/LINE OUT module or LINE OUT (ACTIVE) module or LINE
OUT (PASSIVE) module
• Two supplied stainless steel cheese-head screws M3x5
• Size 2 Allen key
AMM 10