Connecting Rec Out - Harman AKG AMM 10 Mode D'emploi

Connecting REC OUT

AMM 10
DETACHING INDIVIDUAL WIRES
Place a thin object (e.g. ballpoint pen) in the small pit in the middle of the orange lever to
prevent slipping.
Press on the orange part of the connector and the wire can be pulled out with a small amount
NOTE
of resistance.
Figure 12: Detaching the wires
The AUX / LINE OUT module must be installed one slot away from the MASTER CONTROL,
as the two modules are connected to one another via a separate cable.
The connectors of this cable are mechanically coded and so cannot be connected the wrong
way round. Use only the cable included with the REC module to connect this module.
Figure 13: Connecting RECORD to MASTER CONTROL
Connect the cable to the special connectors provided for that purpose (small white terminal
strip).
Installation and Connection
43