Connecting Trafo In - Harman AKG AMM 10 Mode D'emploi

Connecting TRAFO IN

AMM 10
The TRAFO IN plug-in module can only be used in conjunction with the AUX/LINE IN module.
You will need:
• TRAFO IN module and AUX/LINE IN module
• Supplied stainless steel cheese-head screw M3x5
• Size 2 Allen key
1) Undo the two screws on the underside of the AUX/LINE IN module. These screws fasten
the black cover plate on the underside and the metal strain relief clip on the upper side.
Figure 16: Unscrewing the base plate
2) Remove the four blue jumpers from the top side of the circuit board and mount the
transformer module in their place.
Figure 17: Removing jumpers
Jumpers
After removing the jumpers, keep them in a safe place in case you want to remove the TRAFO
IN module in the future. In that case, put the four blue jumpers back in their original position.
NOTE
Installation and Connection
45