Installation
9.6
Mounting the inverter
Please observe the following instructions for the installation location:
• Observe the length of the extension cable from the inverter to the generator.
➤ Drill the holes as shown in fig. e, page 8.
➤ Screw on the inverter.
9.7
Mounting the control panel
Please observe the following instructions for the installation location:
• Observe the length of the extension cable from the control panel to the
generator.
➤ Drill the holes as shown in fig. f, page 8.
➤ Insert the plug into the control panel.
➤ Screw on the control panel.
22
TEC60, TEC60LPG
EN