Dometic TEC Série Instructions De Montage page 17

TEC60, TEC60LPG
!
CAUTION!
• Fire hazards
Do not install the generator in a box or room without any openings,
but in well-ventilated spaces instead.
• Only operate the generator if you are certain that the housing and the
cables are undamaged.
• Install the generator on a stable surface.
• Do not tilt the generator more than 20° from the vertical position.
A
NOTICE!
• Only use the device as intended.
• The generator is not suitable for use in water vessels.
• Do not make any alterations or conversions to the device.
• If a welding operation has be done on the vehicle disconnect all
generator cables, otherwise the electronics may be damaged.
2.2 Handling electrical cables
!
WARNING!
• The electrical power supply may only be connected by a qualified
electrician (e.g. according to VDE 0100, Part 721 in Germany).
!
CAUTION!
• Attach and lay the cables so that they cannot be tripped over or
damaged.
A
NOTICE!
• Use cable ducts to lay cables through walls with sharp edges.
• Do not lay loose or bent cables next to electrically conductive
materials (metal).
• Do not pull on the cables.
EN
Safety and installation instructions
17