Important Safety Instructions; Getting Started; Precautions - Atlantis Land A05-17AM-D01 Manuel D'utilisation

Important Safety Instructions

•
Read the Safety Instructions carefully and keep it for later use.
•
Be aware of all warnings and instruction signs marked on the products.
•
When cleaning, turn off the electrical supply at all times. Never use liquid or aerosol detergent, use
a damp rag instead. For more details, please refer to Pag. 6 "Cleaning the Monitor."
•
Always keep the product away from heavy moisture.
•
Keep this product stable all times. The product may fall causing serious damage.
•
Do not clog apertures on the bezels used for ventilation purpose. Do not install this product in
poor ventilated areas. Always keep this product away from all kinds of heat sources.
•
The power source used for this product must match one marked on the product's label. Please
consult your dealer if you have any doubt.
•
In order to avoid electric shock, a 3-wire plug with a grounding pin is provided. Do not use any
kind of plug without grounding.
•
Do not lay the power cord in a pathway or rest anything heavy on it.
•
Do not insert objects or pour liquid into this product through apertures on bezels. It may touch a
high voltage area causing an electric shock or short circuit.
•
Do not attempt to repair the product by yourself. It may expose you to electric shock. Contact a
dealer near you for service.
•
Do not plug the power cord in under the following circumstances. A qualified field service
electrician is needed.
• When the power cord is damaged or frayed.
• If liquid has been poured into the product.
• If the product has been exposed to rain or heavy moisture.
• If the product can't be adjusted and operated properly by following the operative instructions. Intent
to do more advanced adjustments may result in extensive work for field service electrician.
• If the product has been dropped or the casting is broken.
• If there is a dramatic change of the performance.
• A proper type of power cord has been selected according to the safety of destination and must be
used to prevent electric shock.

1 Getting Started

Congratulations on your purchase of a TFT LCD Color Monitor. This section lists package contents,
features, precautions, as well as cleaning and installation instructions.
I ! P
MPORTANT LEASE KEEP THE ORIGINAL BOX AND ALL PACKING MATERIAL FOR FUTURE SHIPPING
.
NEEDS

1.1 Precautions

•
Sit at least 18"(45 cm) away from the screen when in use.
•
Do not touch the LCD panel with your bare hands. Oil from your skin is difficult to remove and
may damage the screen.
•
Do not expose the LCD monitor directly under sunlight or other heat sources. When in use, the
LCD screen should be facing away from light sources to reduce glare.
•
It is important to choose a well-ventilated area to place your LCD monitor for adequate ventilation.
Do not place anything on top of the LCD monitor.
•
Ensure the area around the LCD monitor is clean and moisture-free.
•
Do not place heavy objects on the power cord, adapter, or signal cables.
•
If smoke, abnormal noise, or strange odor occurs, immediately turn the LCD monitor off and call
your dealer. Do not continue using the LCD monitor.
•
Do not remove the rear cover by yourself. The display unit contains high-voltage parts and may
expose you to the electric shock. Contact your local dealer if service is needed.
A05-17AM-D01 - A05-17BM-D03 - A05-19BM-D02_X02
ENGLISH
5 - 40