Installing A Payment System - Miele XCI-Box Mode D'emploi Et Instructions De Montage

Empty sensor
The empty sensor is connected to
terminals 4.1 and 4.2. These meet
safety extra-low voltage requirements
(class III).
The specifications of the sensor
manufacturer must be observed.
The cables must be routed separ-
ately from all other cables.

Installing a payment system

Payment system in timed operation
The wiring diagram is provided at the
end of these operating and installation
instructions in section  ("Timed op-
eration").
- C4030, C4031, C4065, C4070,
C4080
- C5003
Payment system in programme oper-
ation
The wiring diagram is provided at the
end of these operating and installation
instructions in section  ("Pro-
gramme operation").
- C4030, C4031, C4060, C4065,
C4070, C4080
- C5002, C5004
Legend
3 4 7-pin coupling of the payment
2 7 5
1 6
system
The 7-pin coupling of the pay-
ment system can be removed to
connect the cables directly with
the XCI box terminals.
XCI Terminal sockets of the XCI box
C Schematic diagram of the elec-
trical circuit in the payment sys-
tem

Timed operation

Programme operation

Symbol for PE terminal (earth)
en - English
37