Publicité
STEP 1
TRACE A CHALK LINE ON THE FLOOR FOR DESIRED LOCATION OF GONDOLA AND
LAY DOWN THE END POST (ITEM#1), BASE SHOE (ITEM#11) AND THE KICK PLATE
(ITEM#2) ALONG THE CHALK LINE.
STEP 2
INSTALL THE BASE SHOE (ITEM#11) AT THE BOTTOM OF THE END POST (ITEM#1).
INSERT THE TEETH INTO THE SLOTS AND GIVE A PRESSURE BY PUSHING DOWN
THE SHOE UNTIL THE LOCK AND THE LATCH ARE ENGAGED.
LATCH
DETAIL A
STEP 3
ADJUST THE BASE FOOT LEVELING SCREW AT 3/4" AND THE UPRIGHT POST LEVELING
SCREW AT 1/2".
IMPORTANT
THE GONDOLA MUST BE LEVELED
AND CORRECTLY ADJUSTED.
FAILURE CAN DO SO MANY CAUSE:
SHELVING COLLAPSE AND
PERSONAL INJURY.
TITLE
I:\dessins\INSTRUCTION\INS-001\INS-001017.idw
ITEM#2
LOCK
ITEM#11
S RIE HYBRIDE
HYBRID SERIES
SLOT
(ITEM#1)
A
ITEM#1
IMPORTANT
SHELVING CAN COLLAPSE IF THE
BASE BRACKETS ARE NOT
PROPERLY INSTALLED AND
LOCKED.
NOTE
ENGINEERING MAY SUGGEST THE
USE OF THE ANCHOR FOOT
BRACKETS SECURED WITH
ANCHORS BOLT 1/4" X 2 1/4"L FOR
EACH POST, INTO THE FLOOR.
DRAWING
INS-001017
ITEM#11
CHALK
LINE
PAGE
REV
-
15
21
OF
Publicité
