6. OPERATING INSTRUCTIONS
6.1 OVERVIEW
1 Handle
2 Light
3 Switch
4 Ground cover
6.2 INSERTING THE BATTERIES
To use the batteries, first unscrew the ground cover (position 4 in the overview) by tur-
ning it anticlockwise. Open the battery compartment by pressing the cap of the battery
cover with a small screwdriver, for example, Image 2.
Insert the batteries into the battery compartment, Image 3. Ensure the correct polarity.
Re-insert the battery compartment cover. Screw in the bottom cover again on the upper
part and tighten it by turning it clockwise.
6.3 OPERATION
Switch the LED camping lantern on by rotating the switch (position 3 in the overview)
clockwise. You can set the luminosity of the LED camping lantern by further rotating the
switch, Image 4.
7. MAINTENANCE AND CARE
7.1 MAINTENANCE
The LED camping lantern does not need to be maintained with proper use of the product. If you do not use the camping lantern for a long period
of time, remove the batteries from the battery compartment.
7.2 CARE
Clean the LED camping lantern with a dry, soft cloth only. Do not use any aggressive cleaning agents or solvent-based cleaners. Never allow liquids
to ingress into the device.
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
Entsorgen Sie Elektrogeräte nicht mit dem Hausmüll! Elektro- und Elektronik-Altgeräte müssen getrennt gesammelt und einer
umweltgerechten Wiederverwertung zugeführt werden. Über Entsorgungsmöglichkeiten für Elektro- und Elektronik-Altgeräte
informieren Sie sich bei Ihrer Gemeinde- oder Stadtverwaltung.
9. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Deutschland
close
Image 1: Overview
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
open
Image 2: opening the battery
compartment
Image 3: Inserting the battery
light
info@eal-vertrieb.com
www.eal-vertrieb.com
OFF
ON
dark
Image 4: switch
© EAL GmbH, 46000, 10. 2019
5