Pre-Installation - Bigassfans Powerfoil X2.0 Manuel D'installation

CAUTION: The wall controller and upper temperature sensor contain sensitive electronic PCBs. Use
extreme care when handling! ESD precautions recommended.
The SmartSense is shipped in a single box and packaged in static shielding materials for ESD protection. Review
the information below to ensure you have received all necessary components for installation and operation.
Note: Drawings are not to scale.
Parts
Wall Controller &
Mounting Hardware
1. Install the appropriate plug type for your region.
2. The resistor is needed only for 0–10 V devices controlled by a 4–20 mA analog signal when connected.
Power Cord Plugs
Install the appropriate plug type for your region.
2

PRE-INSTALLATION

Upper Temperature Sensor
& Mounting Hardware
Install plug
WWW.BIGASSSOLUTIONS.COM
Power Cord
© 2015 DELTA T CORP. ALL RIGHTS RESERVED.
1 500 Ω Resistor
Remove plug
2