Cpu_Fan1, Pump_Fan1, Sys_Fan1~4: Fan Connectors - MSI MPG X570 GAMING EDGE WIFI Mode D'emploi

CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors

Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode.
PWM Mode fan connectors provide constant 12V output and adjust fan speed with
speed control signal. DC Mode fan connectors control fan speed by changing voltage.
You can follow the instruction below to adjust the fan connector to PWM or DC Mode.
CPU_FAN1 is the auto-detection mode fan connector, the system will auto detect the
fan mode.
Switching fan mode and adjusting fan speed
You can switch between PWM mode and DC mode and adjust fan speed in BIOS >
HARDWARE MONITOR.
Select PWM mode or DC mode
Important
Make sure fans are working properly after switching the PWM/ DC mode.
Pin definition of fan connectors
PWM Mode pin definition
1 Ground
3 Sense
22
Overview of Components
(Auto-detection Mode)
There are gradient points of the fan speed that allow you to adjust
fan speed in relation to CPU temperature.
2 +12V
4 Speed Control Signal
1
CPU_FAN1
1
SYS_FAN1~4
(Default DC mode)
DC Mode pin definition
1 Ground
3 Sense
1
PUMP_FAN1
(Default PWM mode)
2 Voltage Control
4 NC