Publicité
Les langues disponibles
Les langues disponibles
en
1 Hood body
2 Switch panel
3 Lighting
4 Metal grease filter
5 Safety Glass pane
6 Filter pane
Product description
Switch Panel
The switch panel consists according to the
model type of five or seven key buttons.
Power of the supercharger
The first four buttons control the power of the
supercharger.
Button „1"
= low performance of the
supercharger
Button „2"
= middle performance of the
supercharger
Button „3"
= high performance of the
supercharger
Button „Int" = intensive level
Press any button to switch on the extractor
hood. The hood is switched off by pressing
the back-lighted keys once more. The
extractor hood automatically switches back
after 3 min. from the intensive level to level 3
(high performance of the supercharger).
Automatic Cool Down Period
The automatic cool down period is activated
by pressing the button with the clock symbol.
The exhaust hood will progressively switch
from level 3 down to level 1 and run at that
level for approximately 15 minutes before
turning off.
Lighting
Press the button with the light symbol to turn
on the illumination. The illumination is turned
off by pressing the button again. The
illumination is dimmed by pressing and
holding the button for a longer period.
Brightness is raised again by another long
press of the button.
Clean Grease Filter Alert
When the clean grease filter alert lights up
(right button), the filter must be cleaned. Af-
ter cleaning the filter, press and hold the right
button (3) for at least 5 seconds. The alert
light will turn off. The clean grease filter alert
will be activated after a maximum of 15
operating hours or 14 days (even if nothing
has been cooked).
Cleaning and care
Cleaning of the surface
Risk of electric shock! Please separate the
extractor hood from the power supply network
by pulling the plug or the disconnection of
the fuse. Please pay attention to the fact that
no water seeps into the appliance during the
cleaning process.
Untimely cleaning of the surface saves later
a troublesome removing of stubborn soiling.
For the cleaning use only commercial
detergent or all-purpose cleaners which are
suitable for stainless steel / aluminium.
Please do not use scouring agents or steel
wool!
After the cleaning of the extractor hood
please tend the stainless steel surfaces with
a high-grade steel-care product.
Only with a light soapy water and a very soft
cloth varnished surfaces have to be cleaned.
Publicité
