LaMotte WaterLink Spin Touch Mode D'emploi page 9

SAVE, PRINT, AND SEND TEST RESULTS
Test results can be saved, transferred to the WaterLink Connect mobile app via Bluetooth,
and sent to the Mobile Bluetooth Printer (Code 5-0066).
Test History Settings
The WaterLink Spin Touch can log test results for 250 water samples in the Test History.
The results for the most recent sample will be located at the top of the list. All results can
be logged automatically or results for an individual sample can be logged after the sample
has been tested.
To turn on automatic logging, tap ut t t o
Tap and to return to the test screen. When Auto Save is selected
highlighted on the Test Results screen.
To manually log results for one sample at a time, Auto-Save Tests must be disabled. If
Auto-Save Tests is disabled
has been run, tap
A user defi ned identifi cation tag can be assigned to an individual sample result. The tag
can be up to 4 hexadecimal characters. It cannot begin with a zero. To tag a test result,
tap on the bottom of the Test Results screen and use the buttons to enter up to four
characters. Tap
Results screen. Tap
tagged result will appear on the Test Results screen and the Test History screen. The tag
will be preceded by "T-".
Test Results
Test Time 05:30:06 30-Oct-2018
FCL - 1.31
TCL - 1.31
CCL - 0.00
PH - 7.8
ALK - 100
HARD - 230
Save
Tagging
Results
on the Test Screen. Tap
will be highlighted on the Test Results screen. After the test
to save the results for that water sample to the Test History.
to erase a character. Tap
to return to the Test Results screen without saving the tag. The
Test History
12:02A 30-Oct-2018 Salt 401
12:01A 30-Oct-2018 Salt 301
12:00A 30-Oct-2018 T-4650 Chlorine 100
12:00A 30-Oct-2018 Chlorine 300
11:57A 30-Oct-2018 T-ABC7 Chlorine 300
11:49A 30-Oct-2018 Biguanide 400
Select All/ View Delete
De-Select All Selected Selected
Results Results
CYA - 2
COPPER - 0.1
IRON - 0.1
PHOS - 0
SALT - 489
Print Transfer Return
Results Results to Test
via via Screen
Bluetooth Bluetooth
to save the tag and return to the Test
Go to Top
Scroll up
or down
the test
list by 5
entries
Go to Bottom
History Home
Settings
Select
Auto Save
9
. Select Auto-Save Tests.
will not be