Stand; Commissioning; Scope Of Delivery; Operating And Maintenance Instructions - Tintometer Lovibond SD 315 Oxi Mode D'emploi

2.6 Stand

Stand folded shut. The
instrument can be hung
up on a strap

3. Commissioning

3.1 Scope of delivery

SD 315 Oxi (Set 1)
• Basic instrument
• DO electrode (2 m cable)
• KOH electrolyte solution
• Replacement membrane
heads
• 2 x AAA batteries
• Protective armour
• Operating instructions for
calibration flask

3.2 Operating and maintenance instructions

Protect the instrument and electrodes at all times from conditions that could damage the
mechanical and electronic components. Pay particular attention to the following points:
• The temperature and ambient humidity during operation and storage must be within
the limits specified in the technical data
• The instrument must be kept away from the following influences at all times:
- Extreme dust, moisture and wetness
- Intense light and heat
- Irritant fumes or vapours containing high concentrations of solvents
• The battery must be removed when storing the instrument at ambient temperatures
above 50°C, or before long periods without use
• When connecting the USB interface cable, ensure that only permitted components
are connected
Operation with the USB 300 interface cable is recommended. In this case,
the instrument will draw power from the USB interface of the connected PC or
USB power adapter.
38
Pull
Pull to expand
SD 315 Oxi (Set 2)
• Basic instrument
• DO electrode
(10 m cable)
• KOH electrolyte solution
• Replacement membrane
heads
• 2 x AAA batteries
• Protective armour
• Operating instructions
for calibration flask
1 x pull:
Set up the instru-
ment on a table
SD 315 Oxi (Set 3)
• Basic instrument
• DO electrode
(30 m cable)
• KOH electrolyte solution
• Replacement membrane
heads
• 2 x AAA batteries
• Protective armour
• Operating instructions
for calibration flask
SD_315_DO_1 06/2020
2 x pull:
Hang the
instrument on
a screw