Battery Change; Protective Armour And Electrode Holder - Tintometer Lovibond SD 315 Oxi Mode D'emploi

2.4 Battery change

If >bAt< appears in the lower display, the batteries are spent and must be replaced. However,
instrument function is still ensured for a certain amount of time. If >bAt< appears in the upper
display, the battery voltage is no longer sufficient for the instrument's operation and the battery
is now completely drained. The batteries must be changed. To do this, proceed as follows:
Place the instrument
with the display facing
downwards and remo-
ve the screws on the
housing.
Replace the top section. Note the 3
sealing rings in the lower section and
the housing seal in the upper section.

2.5 Protective armour and electrode holder

SD_315_DO_1 06/2020
Turn the instrument
with the display
facing upwards.
!
Open the upper
Do not touch the circuit
section.
Screw the instrument
back together.
Do not use too much
pressure!
Insert the batteries.
board!
37