Cleaning The Click-On Attachments - Philips S91 Série Mode D'emploi

32
English
1
2
1
2

Cleaning the click-on attachments

Place the arrows on the ring in line with the
projections in the shaving head holder. Turn the
ring clockwise until it clicks to indicate that the
ring is fixed.
- Orange retaining ring: Place the retaining ring
on the shaving head and turn it clockwise to
reattach the retaining ring. Repeat this process
for the other retaining rings.
Each retaining ring has two recesses that fit
exactly into the projections of the shaving head
holder. Turn the ring clockwise until your hear a
click to indicate that the ring is fixed.
Hold the shaving head holder in your hand
when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface when you do
this, as this may cause damage.
11 Attach the shaving head holder to the bottom
part of the shaving unit ( click ).
Never dry trimmer or beard styler attachments with
a towel or tissue, as this may damage the trimming
teeth.
The accessories supplied may vary for different
products. The box shows the accessories that have
been supplied with your product.
Cleaning the trimmer attachment (S9041/12,
S9031/12 only)
Clean the trimmer attachment after each use.