dirna Bergstrom Bycool Compact 1.4 Instructions De Montage page 23

COMPACT 1.4
2 Connect the other end of the cable and connect
the positive wire (blue) to the connections box in
position X4.
Note: Depending on the location of the
connections box, the positive wire will have
excess length. Cut this to the required length.
2
Pass the cabling through position X4 and
clamp the terminal
3 Run the brown wire (negative) to the specially
fitted box.
Note: This is normally close to the batteries.
Depending on the location of the batteries, the brown
wire will have excess length; cut to the required size
and clamp the supplied terminal.
3
3
Air conditioning for vehicles
2
Position the supplied 30A fuse and secure with
3
23
Run the wire through the
supplied rubber sleeve
nut and washer
EN
2