Intended Use - VOLTCRAFT PL-135 Mode D'emploi

2. INTENDED USE

Use this product to measure air temperature, airflow velocity and volume flow rate via
an external, tethered telescopic hot-wire sensor with thermistor. The product is suited
for all kinds of applications related to heating, air-conditioning and ventilation. The
readings are shown on the LC display. When the product is connected to a computer,
the readings can be displayed as a graph and exported as a text document using the
included software. Power is supplied via an integrated LiPo rechargeable battery.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting, fire,
electric shock etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements.
Observe all safety instructions and information within this operating
manual.
23