Kostal Smart Energy Meter Notice D'installation page 92

Installation instructions
Tools required
n
Wire strippers
n
Philips screwdriver, isolated
n
Flat head screwdriver, isolated
Connecting and commissioning
DANGER
Risk of death due to electrical shock
The live components carry life-threatening voltages.
n
Always switch off the power supply to the electric distributor before ins-
tallation / maintenance work and lock it to prevent it being connected
to the power supply again by mistake.
n
Ensure that the wires which are to be connected to the meter are
voltage-free.
n
Installation and maintenance work on this device may only be carried
out by an authorised electrician.
ATTENTION
It must be possible for the end user to de-energise the KOSTAL
Smart Energy Meter using a freely accessible meter fuse or an additional Off
switch.
92 © 2019 KOSTAL Solar Electric GmbH