Kostal Smart Energy Meter Notice D'installation page 103

Calling up online interface via network environment under Windows
(Win7 and Win10)
1.
Under Windows, in File Explorer click on "Network" or open the Start
menu using the Windows button and click on "Devices and printers".
An icon entitled KOSTAL Smart Energy Meter (e.g. KSEM-712345678)
should be visible.
2.
Click on the icon – the standard browser opens with the KOSTAL
Smart Energy Meter log-on page.
Note: The target network must not be classified in the PC as "Public network"
otherwise this function will be blocked by Windows.
Using HTTPS in the browser
To use the KOSTAL Smart Energy Meter with HTTPS in the browser, enter
"https://" in the address line.
Note: Because the KOSTAL Smart Energy Meter's online interface is not a
website registered on the Internet, the browser will display it as unsafe. To call
up the online interface anyway, the browser's warning must be ignored and a
one-off or permanent exception added under "Advanced settings".
Configuring settings
Set the KOSTAL Smart Energy Meter's interfaces (RS485 Modbus) to suit the
connected inverter. Under Modbus settings, you only need to select one inver-
ter to the interface to do this. The appropriate values are stored as standard.
However, you can adapt the values if necessary.
© 2019 KOSTAL Solar Electric GmbH
EN
103