Aux - Kenwood KDC-X497 Mode D'emploi

Direct Music Search (using RC-406)
1
Press DIRECT.
2
Press the number buttons to enter a track/file
number.
Press 4 / ¢ (+) to search for music.
3
• To cancel, press .
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file. (➜ 10)
Select a song by name
While listening to iPod...
1
Press .
2
Turn the volume knob to select a category, then
press the knob.
3
Press again.
4
Turn the volume knob to select the character to
be searched for.
Press 4 / ¢ to move to the entry position.
5
You can enter up to three characters.
6
Press the volume knob to start searching.
7
Turn the volume knob to make a selection, then
press the knob.
7
Repeat step until the desired item is selected.
• To search for a character other than A to Z and 0 to 9,
enter only " * ".
• To return to the previous hierarchy, press
• To return to the top menu, press number button
5 iPod.
• To cancel, press and hold .
6
Set the skip ratio
While listening to iPod or KME Light/ KMC file...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SETTINGS], then
press the knob.
3
Turn the volume knob to select [SKIP SEARCH],
then press the knob.
4
Turn the volume knob to make a selection, then
press the knob.
0.5% (default)/ 1%/ 5%/ 10%: Sets the skip ratio
when searching for a song.
(Holding 4 / ¢ skips songs at 10% regardless
of the setting made.)
5
Press and hold to exit.
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a
commercial telephone accessory. (➜ 13)
When a call comes in, "CALL" appears.
• The audio system pauses.
• To continue listening to the audio system during a
call, press SRC. "CALL" disappears and the audio
system resumes.
When the call ends, "CALL" disappears.
• The audio system resumes.
.

AUX

CD / USB / iPod
Preparation:
Select [ON] for [BUILT-IN AUX] / [BUILTIN AUX]. (➜ 4)
Start listening
1
Connect a portable audio player (commercially
available).
Auxiliary input jack
3.5 mm (1/8") stereo mini plug with "L" shaped
connector (commercially available)
2
Press
3
Turn on the portable audio player and start
playback.
Set the AUX name
While listening to AUX...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SETTINGS], then
press the knob.
3
Turn the volume knob to select [AUX NAME SET]/
[AUX NAME], then press the knob.
4
Turn the volume knob to make a selection, then
press the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5
Press and hold
Portable audio
player
SRC to select AUX.
to exit.