Sound Menu - Loewe Audiodesign 3D Orchestra 5.1 IS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
n
3D Orchestra
Instruction manual
Automatic room acoustic measurement

Sound menu

The Automatic speaker system configuration
menu appears.
Proceed.
...
Sound com-
ponents
Now leave the room so that the automatic room
acoustic measurement can work undisturbed. The
measuring procedure starts approx. 10 sec after you
have pressed the key
If an error occurs during the auto set-up, a warning
tone will sound and a message will appear on the
TV screen. Then, check the conditions described
above for the Sound System to work perfectly.
The auto set-up takes approx. 8 minutes.
Please measure the room in a listening situation
that is typical for you (for example, with closed
doors). After the measuring procedure, the posi-
tions of the TV set and the 3D Orchestra Speakers
must not be changed any longer. Similarly, the room
(with respect to its acoustics) should not be signif-
icantly altered. In the event that you subsequently
change the number and / or the position of the
speakers or that the acoustics in the room is
changed (e.g., by structural measures, changed
floor covering or wall decoration or open / closed
sliding doors), repeat the automatic room acoustic
measurement as described above.
After the completion of the auto set-up, a message is
displayed about the result.
...
Sound com-
ponents
Press BACK.
Your 3D Orchestra sound system is now ready for
operation. You can now remove the measuring mi-
crophone.
Automatic speaker system configuration
Automatic speaker system configuration
The sound of your speaker system is optimally adjusted to the room by the
automatic configuration below. Before you start, please position the
measurement microphone in the desired listening position and align it with the
TV set (please also see information in instruction manual). Please leave the room
after pressing the
button, to prevent interference. After 10 seconds,
configuration starts automatically. After about 8 minutes a final chime is played.
Back with
Proceed with
.
Hint
Hint
Automatic speaker configuration has been successfully completed.
4 speakers and 1 subwoofers were configured.
Finish wizard with
- 22 -
Sound menu
Functions will be changed or added in the TV menu Sound (see TV
set instruction manual) if 3D Orchestra is used.
HOME: Call Home view.
3456 Mark System settings,
OK call System settings.
6 5 Mark Sound,
4 go to next column.
Sound mode
6 5 Mark Sound mode,
4 go to next column.
...
Sound mode
Under the menu item Sound mode, the original items will be replaced
by the options Mono, Stereo and Surround Mode.
Mono
Surround
Mode

Publicité

Table des Matières
loading

Table des Matières