Jrainbow1~2: Addressable Rgb Led Connectors; Ez Debug Led - MSI PRO H610M-G DDR4 Manuel D'utilisation

JRAINBOW1~2: Addressable RGB LED connectors (For
PRO H610M-G DDR4)
The JRAINBOW connectors allow you to connect the WS2812B Individually
Addressable RGB LED strips 5V.
1
⚠
CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JRAINBOW
connector provide different voltages, and connecting the 5V LED strip to the JRGB
connector will result in damage to the LED strip.
⚠
Important
The JRAINBOW connector supports up to 75 LEDs WS2812B Individually
∙
Addressable RGB LED strips (5V/Data/Ground) with the maximum power rating of
3A (5V). In the case of 20% brightness, the connector supports up to 200 LEDs.
Always turn off the power supply and unplug the power cord from the power outlet
∙
before installing or removing the RGB LED strip.
Please use MSI's software to control the extended LED strip.
∙

EZ Debug LED

These LEDs indicate the status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates booting device is not detected or fail.
Pin Signal Name
1 +5V
3 No Pin
18
Pin Signal Name
2 Data
4 Ground