Beta 1895 6 Mode D'emploi page 14

EN
INSTRUCTIONS FOR USE
Step Action
After the timer and temperature have been set, press "Normal". The corresponding indicator will turn
on, and the device will work in "Normal" mode; it will work non-stop with full ultrasonic power and
countdown display.
Normal mode If you want to switch to the other mode, just press "Degas" or "Soft". The "Normal" indicator will turn
off and the indicator for the "Degas" or "Soft" mode will turn on.
If you want to stop working, press "Normal" again. Then both heating and ultrasonic cleaning will stop,
and the corresponding indicator will turn off.
After the timer and temperature have been set, press "Soft". The corresponding indicator will turn on,
and the device will work in "Soft" mode.
If you want to switch to the other mode, just press " "Degas" or "Normal"; the "Soft" indicator will turn
Soft mode off, and the indicator for the "Degas" or "Normal" mode will turn on.
If you want to stop working, press "Soft" again. Then both heating and ultrasonic cleaning will stop,
and the corresponding indicator will turn off.
NOTE: The "Degas", "Normal" and "Soft" modes cannot be operated simultaneously.
14