CombiSteel 7065.0005 Mode D'emploi page 6

Pull out the white helix mixer towards yourself.
Figure 6
Remove the tank seal.
Figure 7
Re-assembly of washed Parts
Make sure that all the washed pieces are thoroughly
cleaned. All washed parts must be carefully
assembled. Some of the parts may be worn after
being greased with food oil. Non-lubricated parts
shorten lifetime and reduce operating performance.
Apply Vaseline around the tank seal.
Figure 8
Attach the gasket to the white helix mixer as shown
in the picture.
Apply Vaseline on the gasket.
Replace the white helix mixer on the cylinder plate
and push forward until it sits firmly to the back end
of the plate.
Replace the bowl on the cylinder plate and helix by
lifting it up and pushing forward.
www.combisteel.com
Figure 9
Figure 10
Figure 11
Figure 12
6