Voltage monitor
Alarm open door
13
How to order spare parts
When ordering spare parts make reference to the number written on the unit plate.
W AR NI NG
W orn parts should be replaced only by qualified personnel or by the m anufacturer.
14
How to dispose of the packing
Wooden, plastic, polystyrene packing shall be disposed of according to the regulations in force in the
country where the unit is used.
15
How to dispose of the unit
Do not discharge scrapped components in the environment. They should be disposed of by companies
dealing with special waste collection and recovery, according to the regulations in force in the country where the
unit is used.
W AR NI NG
Do not discharge the refrigerant in the atm osphere. I t should be disposed of by
companies dealing with special waste collection and recovery.
30
(EA)
The
voltage
monitor
electronic device which checks
the supply voltage of the unit.
When voltage variations exceed
+/- 12% the device activates the
red led and the alarm led. EA is
displayed in the alarm menu. The
unit stops for about 6 minutes
and
restarts
automatically
voltage is within the prescribed
limits.
Warning: On first starting the
monitor carries out a counting
phase of 7 minutes, during which
the unit should be left connected
but in
OFF condition.
(Opd)
In case of presence of door open
and passed the delay tdO=60
min (not visible parameter to the
first level).
Led signalling blinking.
Recording of label the Opd in the
AL
folder
of
the
machine.
Manual halt of relé the alarm.
Led and the signalling in the
folder AL will remain active until
at the close of the door.
Wrong supply voltage
is
an
if
menu
be