Operation; Setting Up The Product - Renkforce 1301271 Notice D'emploi

12. Operation

a) Setting up the product
The product may not be placed in a cupboard.
Do not cover or block any openings on the product.
Prevent the product, the power cord or power plug from coming into contact with hot surfaces
(e.g. an oven). Never operate the product next to open flames. Keep highly combustible materials
away from the device.
Do not remove the product's legs.
• Due to its high weight, two persons are required to transport, unpack and set up the product.
• Choose a location out of the reach of children to set up the device to prevent their coming into contact
with the product's hot surfaces.
• Set up the product near a power outlet.
• Choose an even, horizontal and heat-proof surface for assembly. The surface must be stable enough to
support the weight of the product.
• Set up the product at a height of approx. 85 cm.
• When setting up the device, make sure there is sufficient ventilation. Keep a minimum distance of 30 cm
above and 20 cm to the sides of the product. The back of the product should be placed directly next to
a wall.
34
30 cm
0 cm
20 cm
>85 cm
20 cm