Safety Instructions; Short Cord Instructions - all-clad TG806 Guide De L'utilisateur

15. If this appliance has a polarized plug (one blade is wider than the other), it is to reduce the risk of electric
shock. This plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify
the plug in any way.
16. To disconnect the appliance, turn each of the control dials to mini position (on the
remove plug from the wall outlet.
17. Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS.

SAFETY INSTRUCTIONS

• Never leave the appliance unattended when in use.
• Do not immerse the appliance, the control panel or power cord in water.
• If an accident occurs, rinse the burn immediately with cold water and call a doctor if necessary.
• If you have any problems, contact the authorized after-sales service center or the internet address
www.all-clad.com.
If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.

SHORT CORD INSTRUCTIONS

A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord.
Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in
their use.
4
position), then
•