Hazet-Werk 2174-1/34 Mode D'emploi page 8

1. General Information
• Please make sure that the user of this tool care-
fully reads these operating instructions and fully
understands all the information provided before
using the tool for the first time.
• These operating instructions contain important
advice that is necessary for safe and trouble-free
operation of your HAZET SAC Clutch Alignment
Tool Set.
• For appropriate use of the HAZET SAC Clutch
Alignment Tool Set, it is essential that all safety and
other information in these operating instructions is
adhered to.
• For this reason, always keep these operating
instructions together with your HAZET SAC Clutch
Alignment Tool Set.
• This tool has been designed for specific applica-
tions. HAZET emphasises that any modification to
the tool and/or use for an unintended application
are strictly forbidden.
• HAZET will not be liable for any injuries to persons
or damage to property originating from improper
use, misuse or inappropriate use of the tool, or from
a disregard of the safety instructions.
• Furthermore, the general safety regulations and
regulations for the prevention of accidents in the
application area for this tool must be observed and
respected.
8 8
For your Information
1
2. Explanation of Symbols
note: Please pay attention to these symbols!
reAd THe OperATIng InSTruCTIOnS!
nOTICe!
CAuTIOn!
ATTenTIOn!
TO Be uSed By quAlIFIed perSOnnel Only.
You must wear safety glasses.
Secure separate parts from falling off.
The owner is obliged to observe the
operating instructions and must ensure
that all users of this HAZET SAC Clutch
Alignment Tool Set are instructed in its
use according to the operating instruc-
tions.
This symbol indicates advice that is help-
ful when using the tool.
This symbol indicates important descrip-
tions, dangerous conditions, safety risks
and safety advice.
This symbol indicates advice that can
result in damage, malfunction and/or
functional failure of the device if it is
disregarded.
This tool may cause serious injury and
must therefore be used by qualified
personnel only.