Télécharger Imprimer la page

Hazet-Werk 2174-1/34 Mode D'emploi page 12

Publicité

Les langues disponibles

Les langues disponibles

removal:
Professional removal of the clutch components takes place in reverse order to the installation. The only
difference is that fixing tools are not used.
reset:
When using a new clutch disc with a used clutch pressure plate, the adjusting ring of the clutch pressure
plate has to be re-positioned.
• For this application, select pressure plate 3 hole 2174-13; set 4 hole 2174-14 supplied
with threaded spindle 2174-10 to threaded bolt 2174-6 7 8 (observe thread size M6 M7 M8) and
screw in place with nuts M8 2174-15 (flush).
• Insert reset tool 2174-9 into the recess of the adjusting ring.
• Press down the diaphragm spring of the clutch pressure plate with threaded spindle 2174-10 until the
adjusting ring begins to turn clockwise.
• Use reset tool 2174-9 (anti-clockwise) to re-position the adjusting ring.
• Do not apply force to adjusting ring with reset tool 2174-9.
• Turn threaded spindle 2174-10 back, pressure plate 3 hole 2174-13; remove 4 hole 2174-14 with threaded
spindle 2174-10, reset tool 2174-9, nuts M8 2174-15 and threaded bolts 2174-6 7 8.
• Installation as described.
Maintenance and Cleaning
• Always keep the device clean
• Do not use degreasing agents or water in order to
avoid corrosion
• Inspection and repair may only be carried out by
qualified personnel.
Your contacts for:
• Warranty
• Maintenance and repair
are your local HAZET partners.
Storage
The tool must be stored according the following conditions:
• Do not store the tool set outdoors.
• Keep the tool set in a dry and dust-free place.
• Do not expose the tool set to liquids and aggressive substances.
• Storage temperature: -10 up to +45°C.
• Relative air humidity: max. 60%.
Disposal
• For disposal, clean the device and disassemble it according to the regulations for work safety and
environmental protection. Recycle all recyclable components.
12
Design and Function
3
Maintenance and Cleaning
4
Storage
5
Disposal
6
You must wear safety glasses.
Secure separate parts from falling off.
Spare Parts
• Only use the manufacturer's original spare parts.
• For questions and spare parts orders, please
provide the article number of the device.
• Unsuitable or defective spare parts may cause
damage, malfunction or total failure of the device.
• The use of non-approved spare parts will void all
warranty, service and liability claims as well as all
claims for compensation against the manufacturer
or its agents, distributors and sales representa-
tives.

Publicité

loading