Panasonic NC-EH40P Manuel D'utilisation page 17

Pour in water with another container. Close the lid securely.
Securely plug the body plug horizontally into the body.
Plug into wall outlet. (
Water starts
boiling
automatically.
LED Flashing
LED Lit
LED
Time required to boil water (approx.)
NC-EH40P: 35 min. / NC-EH30P: 27 min. / NC-EH22P: 20 min.
(Amount of water: Maximum Water / Room temperature: 68ºF (20
Press the key
to release lock.
The indicator light
beside the key will be lit.
Lit
Unplug, and remove the lid. Pour out any remaining hot water slowly via
the mark.
Lid release part
→
)
After the water has been
boiled, the following will
be indicated.
LED Flashing
LED Off
LED
Press
the hot water.
When the unit is not in use
●
●
Operation panel
LED Off
)
ºC)
key and dispense
The "Dispense" key will be re-locked
automatically in 10 seconds after you
stop dispensing hot water.
Cautions
Do not pour out water too quickly.
If water splashes over lid release part or
operation panel, it may cause a malfunction.
Do not leave water standing in the container.
(It may cause the container to corrode or smell.)
The boiled water
will be kept warm at
approx. 190ºF (90ºC)
automatically.
LED Lit
LED
• The indication
is estimated water
temperature.
17