Panasonic NC-EH40P Manuel D'utilisation page 15

To open, press the depression in the
opening lever, and lift the lid.
Lid opening lever
To close
Press down on the lid until it clicks.
If an empty container is heated, the overheat safety function (which prevents an empty
container from being heated) will be activated. The power will be shut off automatically to
prevent the problems that may occur due to overheating.
Overheating, the display shows
LEDs flashing alternately
Notice
If an empty container is heated, an odor will be emitted and the container may be discolored.
How to Open/Remove
To remove, push on the lid release lever,
hold the lid opening lever, and pull the lid
out and up diagonally.
Depression
Overheating Protection
Cause
• Less than the minimum water level in the
container was boiled.
• After water is added, the lid might be left open.
To attach
Insert the lid at an angle.
How to cancel the display
Pour water into the container, and
press the key.
Lid release
lever
15