Introduction; Safety Rules; Safety Symbols And Meanings - Generac GRCN6565 Manuel De L'opérateur

INTRODUCTION

Thank you for purchasing this power washer manufactured by
Generac Power Systems, Inc. This model is a high performance,
air-cooled, engine-driven power washer that operates between
3000 and 4000 psi depending on which model you purchased.
These units feature powerful Generac engines, a triplex pump with
ceramic coated pistons, a pressure control valve, an automatic
thermal relief system, a professional grade spray gun with
vibration isolation for reduced fatigue, a stainless steel lance, quick
connect nozzles, steel reinforced high pressure rubber hose for
long life and maximum flexibility and a detergent siphoning hose.
Common sense and strict compliance with the special instructions
are essential to preventing accidents. The operator must read
this manual and thoroughly understand all of the instructions
and warnings before using the equipment. If any portion of the
manual is not understood, contact the nearest Authorized Dealer
for starting, operating and servicing procedures. The owner is
responsible for proper and safe use of the equipment.
The power washer can operate safely, efficiently and reliably only
if it is properly located, operated and maintained. Before operating,
servicing or storing:
• Study all warnings in this manual and on the product carefully.
• Become familiar with this manual and the unit before use.
• Refer to the Assembly section of the manual for instructions on
final assembly procedures. Follow the instructions completely.
The manufacturer cannot anticipate every possible circumstance
that might involve a hazard. The warnings in this manual, and on
tags and decals affixed to the unit are, therefore, not all inclusive.
If using a procedure, work method or operating technique that the
manufacturer does not specifically recommend, ensure that it is
safe for others. Also make sure the procedure, work method or
operating technique utilized does not render the power washer
unsafe.
THE INFORMATION CONTAINED HEREIN WAS BASED ON
MACHINES IN PRODUCTION AT THE TIME OF PUBLICATION.
GENERAC RESERVES THE RIGHT TO MODIFY THIS MANUAL AT
ANY TIME.
Save these instructions for future reference. If you loan this
device to someone, ALWAYS loan ALL instructional materials to
the individual as well.
WHERE TO FIND US
You can contact Generac Customer Service by phone at 1-888-
436-3722, or on the internet at www.generac.com. Record the
important information of the unit in the following chart for future
reference and/or service inquiries.
Model Number
Serial Number
Date Purchased

SAFETY RULES

Throughout this publication, and on tags and decals affixed to the
unit, DANGER, WARNING, CAUTION and NOTE blocks are used to
alert personnel to special instructions about a particular operation
that may be hazardous if performed incorrectly or carelessly.
Observe them carefully. Their definitions are as follows:
Indicates a hazardous situation or action which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation or action which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation or action which, if not avoided,
could result in minor or moderate injury.
Notes contain additional information important to a procedure
and will be found within the regular text body of this manual.
These safety warnings cannot eliminate the hazards that they
indicate. Common sense and strict compliance with the special
instructions while performing the action or service are essential to
preventing accidents.

SAFETY SYMBOLS AND MEANINGS

Toxic Fumes
Slippery Surface
Fire
Moving Parts Flying Objects
Introduction
NOTE:
Kickback Electrical Shock
Fall Fluid Injection
Explosion Operator's Manual
Hot Surface
1