Philips PT866 Mode D'emploi page 10

English
10
Note: Make sure that the projections of the shaving heads it exactly into the
recesses.
7 Put the retaining frame back into the shaving unit and turn the lock
clockwise.
8 Insert the lug of the shaving unit into the slot in the top of the shaver
(1). Then close the shaving unit (2).
Note: If the shaving unit does not close smoothly, check if you have inserted
the shaving heads properly and if the retaining frame is locked.
cleaning the trimmer with the cleaning brush (specific types
only)
Clean the trimmer every time you have used it.
1 Switch off the shaver and disconnect it from the mains.
2 Push the trimmer slide downwards to open the trimmer.
3 Clean the trimmer with the short-bristled side of the cleaning brush.
Brush up and down along the trimmer teeth.
4 Close the trimmer (' click').
Tip: For optimal trimming performance, lubricate the trimmer teeth with a drop
of sewing machine oil every six months.