Kenmore 110.31632610 Guide D'utilisation Et D'entretien page 17

If you experience
Washer not performing as expected (cont.)
still wet (cont.)
rinse temperatures
Load not rinsed
Sand, pet hair, lint, etc. on
TROUBLESHOOTING
Possible Causes
unbalanced.
installation. Drain hose extends into
standpipe farther than 4.5" (114 mm).
temperatures.
Washer not loaded as recommended.
Wash action and/or spin speed too fast
for load.
in water.
Added more water to washer.
Washer not loaded as recommended.
information.
Check drain hose for proper installation. Use drain hose form and
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached to both washer and faucet, and have both
®
ENERGY STAR
and warm washes.
Make sure hot and cold inlet hoses are not reversed.
Both hot and cold water faucets must be on.
Solution
17